Rukmini uPVC Threaded Casing and Filter Pipes is a product used for mining bore wells and providing clean water from depths. These pipes are manufactured and designed in strict compliance with the industry laid quality standards based on the client’s demand
Rukmini uPVC Threaded casing and filter pipes are cost-efficient. On top of the best market price, these pipes can easily be installed reducing the installation charges.
The Pipes are designed in a manner that the components can be assembled end to end very easily.
uPVC screen pipes facilitate optimum performance & amp safety by keeping the gravel pack and other foreign substances out.
Extra strong, long life, low maintenance, and replacement cost.
With close dimensional tolerance and precise design, these pipes are leak proof.
Non-corrosive; no concern of fungus and rust.
The smooth construct of the pipes can filter the water, however, the same does not obstruct the fluency of the liquid allowing the best results.
uPVC does not impart any colour, odour and taste. Thereby, making them perfect for drinking water.
Nominal | Outside Dia. | SHALLOW WELL PLAIN CASING (CS) | MEDIUM WELL PLAIN CASING (CM) | DEEP WELL PLAIN CASING (CD) | |||||
Dia. | CM (mm) | Wall Thickness (mm) | Wall Thickness (mm) | Wall Thickness (mm) | |||||
Inch | mm | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. |
1.25 | 35 | 42 | 42.5 | - | - | 3.5 | 4.1 | - | - |
1.5 | 40 | 48 | 48.2 | - | - | 3.5 | 4.1 | - | - |
2 | 50 | 60 | 60.2 | - | - | 4.0 | 4.6 | - | - |
3 | 80 | 88 | 88.3 | - | - | 4.0 | 4.6 | - | - |
4 | 100 | 113 | 113.3 | - | - | 5.0 | 5.7 | 7.0 | 7.9 |
4.5 | 115 | 125 | 125.3 | - | - | 5.0 | 5.7 | 7.5 | 8.5 |
5 | 125 | 140 | 140.0 | - | - | 6.5 | 7.4 | 8.0 | 9.0 |
6 | 150 | 165 | 165.4 | 5.7 | 6.5 | 7.5 | 8.5 | 9.5 | 10.7 |
7 | 175 | 200 | 200.5 | 7.0 | 7.8 | 8.8 | 9.8 | 11.8 | 13.6 |
8 | 200 | 225 | 225.5 | 7.6 | 8.8 | 10.0 | 11.2 | 13.0 | 14.8 |
10 | 250 | 280 | 280.5 | 9.6 | 11.0 | 12.5 | 14.0 | 16.0 | 17.6 |
12 | 300 | 330 | 330.6 | 11.2 | 13.3 | 14.5 | 16.2 | 19.0 | 21.0 |
Si.No. | Nominal Diameter (DN) | Means Outer Diameter of Pipe | Outer Diameter any any Point | Means Outer Diameter Over Connection | Wall Thickness (under Ribs) | Means Outer Diameter Over Connection | Wall Thickness (under Ribs) | ||||
RMS | RDS | ||||||||||
Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | ||
i. | 100 | 117.0 | 117.3 | 116.8 | 117.4 | 124.0 | 5.0 | 5.7 | 129.0 | 7.0 | 7.9 |
ii. | 115 | 129.0 | 129.3 | 128.8 | 129.4 | 136.0 | 5.0 | 5.7 | 141.0 | 7.5 | 8.5 |
iii. | 125 | 144.0 | 144.3 | 143.7 | 144.5 | 154.0 | 6.5 | 7.3 | 156.0 | 8.0 | 9.0 |
iv. | 150 | 169.0 | 169.4 | 168.6 | 169.6 | 182.0 | 7.5 | 8.5 | 184.0 | 9.5 | 10.7 |
v. | 175 | 204.0 | 204.5 | 203.6 | 204.6 | 219.0 | 8.8 | 9.8 | 221.0 | 11.8 | 13.6 |
vi. | 200 | 229.0 | 229.5 | 228.5 | 229.8 | 247.0 | 10.0 | 11.2 | 251.0 | 13.0 | 14.8 |
vii. | 250 | 284.0 | 284.5 | 283.4 | 284.8 | 302.0 | 12.5 | 14.0 | 309.0 | 16.0 | 17.6 |
viii. | 300 | 334.0 | 334.6 | 333.3 | 335.0 | 21.0 | 21.0 | 21.0 | 21.0 | 21.0 | 21.0 |